
5
III. Phone settings
Phone installation
1) Unscrew the battery cover screw (13) on battery cover (12) and pull off the battery
cover.
2) Put in 3 batteries 1,5 V type AAA. Maintain the correct polarity (+ a -).
LCD display (1) is active only when the batteries are put in correctly.
3) Coiled cord to connect the base unit and handset phone (from left).
4) Regular telephone cord to connect the base unit and plug the phone (from the top side).
Using of batteries
Follow these instructions to use the batteries in the phone set:
1. Batteries supplied in the package are only introductory and serve to test the functions of
telephone set. For the operation of a telephone set, we recommend to buy alkaline batteries
1,5 V type AAA (LR-03, SUM4).
2. Maintain correct polarity. Reverse polarity could destroy the device.
3. If the device is not to be used for a long period of time, remove the battery to prevent
damage.
Wall mount
Mark the place where you to mount the phone. Mark the distance of 100 mm vertically
down two drilled holes. Into drilled holes insert an anchor bolts to tighten them. Between
the bottom edge of the bolt head and the wall leave the distance about 5-7 mm. To hang up
the phone two screws and slide it downward to firmly abuts.