36
/
48
Getting Ready:
1.
Fully charge the battery. For safety reasons, the battery is only 50% charged when
shipped from the factory (See Battery Charging Instructions Below).
2.
Choose a controlled environment away from vehicles, obstacles, and other hazards for
riding.
Even if you have experience with motorized scooters, vehicles, bicycles,
etc., you must familiarize yourself with the function, handling, turning, ramp
climbing, braking distance, performance, and safety of this scooter in a safe and
controlled environment.
3.
Always check and obey all local laws and regulations.
Your insurance policies may or
may not provide coverage for accidents involving the use of this motorized scooter.
To determine if coverage is provided, check with your insurance company or agent.
Do not assume your existing insurance policies provide coverage
.
4.
Unfold the scooter (See Unfolding Instructions above).
5.
Complete a final roadworthiness safety check before operation.
a.
Make sure folding mechanism, dolly handle, wheel lug nuts, other nuts, bolts,
fasteners, etc., are secure.
b.
Inspect the frame, fork and handlebars for cracks or broken connections.
Riding the Scooter Powered:
1.
Install foot pedals, the deluxe seat or travel seat onto the scooter frame. Sit on the seat
with both feet rested on the foot pedals.
2.
Press the on/off button on the thumb throttle once to turn on the scooter. The battery
indicator on the thumb throttle should be lit when the scooter is turned on. Make sure
on the lefthand side the speed setting is set to 1 and forward/reverse control is set to F
for forward mode.
3.
With both hands on the handlebars and eyes looking forward, press the right thumb
throttle to move forward
.
4.
As the motor begins to slowly propel the scooter forward, practice braking by releasing
the right thumb throttle or squeezing the left-hand brake. The scooter should come to a
stop.
5.
Practice reverse by switching the forward/reverse control to R for reverse and slowly
depressing the throttle. Practice braking by releasing the left thumb throttle or
squeezing the left-hand brake. The scooter should come to a stop.
6.
Press the power switch once to turn on the headlight and tail light. Press it again to
turn the lights off.
7.
Toggle the speed setting to 2. The scooter should go faster. Switch to setting 1 to slow
down the scooter. Practice the same for speed setting 3. Practice the following steps to
help you become comfortable with your SNAPnGO.
Practice Steps:
1.
Learn to use the throttle and brake. With your Left hand, apply pressure to the hand
brake. Releasing the hand brake, slowly press the right thumb throttle (throttle) and
move the scooter forward five feet. While releasing the throttle, apply the hand brake
Содержание SNAPnGO 335
Страница 27: ...27 48...
