Glion SNAPnGO 335, Руководство пользователя

Страница: 32 / 48

32 / 48
To install the pouch, hang the pouch hooks onto the T-bar ( make sure the hooks go under the
braking wire before latching onto the T-bar so that the hooks do not press on the braking
wire
) and close the Velcro band around the handlebar down tube.
To install the front basket, simply hang its hooks onto the T-bar (
make sure the hooks go under
the braking wire before latching onto the T-bar so that the hooks do not press on the
braking wire
) and have the front basket bottom bracket securely lean against the handlebar
down tube.
Side baskets are for your additional cargo needs. You do not need to install them if the front basket
is adequate for your daily needs. You need to first install the included hanging brackets onto the
silver seat post. The longer end should face forward. Make sure bracket fitting notch fits onto the
notch on the seat post. Using Allen wrench and included bolts and nuts attach the 2 brackets
securely to the post. Then you need to install the leaning brackets onto the basket. Center the 2
plates on both sides of the basket and secure them with included bolts. The bracket extension
should face outside of the basket so that it could lean against the scooter frame to support the
weight of load in the basket. The bottom of the leaning bracket should be about 2 inches above the
bottom of the basket. The tip of the leaning brackets should rest securely against the scooter
frame spine when basket is hung on the hanging bracket. Refer to online installation video if more
detail is needed.