Glion SNAPnGO 315, Руководство пользователя

Страница: 18 / 37

17
09/20/18
feature, the motor will be in the default “braking” mode when the LCD is on and when the
accelerator is not pressed. The Default gear is 1 as shown on the LCD screen G section. The
speed for gear 1 is 3-4 kmh or 2 mph. Press the gear up button (F1) once, G section will
show 2. Press it again, it will show 3. Gear 2 is 7-8 kmh. Gear 3 is 10-12 kmh. To lower the
speed, press the gear down button once (F2). Gear 3 has the most torque and speed.
Operate your SNAPnGO at a reasonable speed for both your personal safety and others.
CAUTION – Do not make turns at high speeds or on steep inclines. Your SNAPnGO
may tip over.
4. Reverse thumb control: The left thumb control is reverse (T2). It has a top speed of 2-
3mph and doesn’t not change speed regardless of which gear is on.
5. Brake: The left brake handle is the mechanical brake (H). The scooter is on electronic
braking when power is on and the right accelerator or left accelerator is not pressed. The
mechanical brake in the left rear wheel provides added safety for emergency purpose.
When actuated, it will cut power supply to the motor. The electronic brake only works
when the scooter is turned on. In a safe, controlled environment, please familiarize
yourself with the braking distance of the scooter at different speeds before operating
near intersections, pedestrians and other obstacles.
6. LCD Screen: To reset the trip duration and distance travelled: Turn on the power, AFTER
5 seconds, hold the gear up
˄
(F1) and gear down
˅
(F2) button for 2 seconds. The Single
Trip Duration (TM) and Single Trip Distance (DST) will blink. Push the on/off button (F)
once to clear the previous trip information.
Single Trip Time Duration
Real Time Speed (MPH)
Battery Level
Motor Power (W)
Gear Number
Temperature (F)
Not Used, Reserved
for Future Usage
Single Trip Distance
Traveled (Mile)