GLG creator picollo rgbwauv Скачать руководство пользователя

Страница: 4 / 11

GLG Lighting products

device with proper bolts!

Always use a secondary safety rope that can hold at least 10 times the weight of the device.

The minimum distance between the device and illuminated surface is 1 meter. There should not be

any flammable materials 10 meters around the device!

2. Connection to mains

Connect the device to mains with the enclosed power plug. The occupation of the connection

cables is as below:

The earth has to be connected.

3. Master-slave / DMX 512 connection

The wires mus t not c ome into co ntac t with e ach
oth er, otherwise the f ixtu re s will not work at a ll,
or will not work properly.

Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the

controller with the fixture or one fixture with another.

Occupation of the XLR-connection:

If you are using controllers with this occupation, you can connect the DMX-output of The

controller directly with the DMX-input of the 1st device in the DMX-chain. If you wish to connect

DMX-controllers with other XLR-outputs, you need to use adapter-cables.

Содержание creator picollo rgbwauv











