Page
9
of
29
OVERVIEW
The Glensound AOIP22 is an analogue to digital and digital to analogue converter
designed to connect line level analogue audio circuits to a Dante
®
audio network.
Dante
®
network audio is a common protocol for distributing high quality linear audio
over standard IP networks and it is widely used by many audio equipment
manufacturers. The AOIP22 Dante
®
audio interface is compatible with all Dante
®
audio interfaces across all manufacturers. Further details of Dante
®
network audio
can be found at
www.audinate.com
Intended for live on-air broadcast applications, the AOIP22 is built into a rugged
lightweight aluminium chassis with anaodised and laser etched panels. Holes
suitable for temporarily attaching the unit with cable ties to hold it in place and a
remoevable belt-clip are provided for ease of installation.
The AOIP22 provides 2 analogue line level (0dB) inputs to the Dante
®
network and 2
analogue line level (0dB) outputs from the Dante
®
network. These circuits are
electronically balanced on XLRs but can wired unbalanced.
AES67 is supported by the Audinate’s Ultimo chipset and can be easily turned on/off
via Dante
®
controller.
Sample frequencies from 44.1 to 96kHz are supported by the unit when connected to
a Dante
®
network and 48kHz is supported when in AES67 mode.
As per our other Dante
®
equipment 0dBu = -18dBfs