• This appliance is designed for domestic household
use and can be uilt into a standard kitchen cabinet
or housing unit.
• For efficient air circulation, the oven should be
fitted according to the dimensions shown in the
figure. The rear panel of the cabinet must be
removed so that air can circulate freely. The panel
to which the oven is fitted should have a gap of at
least 70mm at the rear.
• Fit the appliance into the opening, tightening the
screws into the 4 holes that can be seen in the frame
of the oven when the door is open.
• The panels of the adjoining furniture
must
be heat
resistant. Particularly when the adjoining furniture
is made of veneered wood, the adhesives should be
0
able to withstand a temperature of 120 C plastic
materials or adhesives which cannot withstand this
temperature will become deformed or unstuck.
• Check that the power rating of the mains supply and
of the sockets are suitable for the maximum power
of the appliance as indicated on the specification
plate. Fit the plug into a socket fitted with a third
contact which corresponds with the earth
connection. This should be properly connected. It
is strongly advised that the appliance should be
properly earthed.
Cooling Fan
• A tangential cooling fan is fitted inside of this
appliance, to make the internal temperature of the
oven stable and the external surface temperature
lower.
• Installation should be carried out according to the
instructions by a professionally qualified person.
• The manufacturer declines all responsibility for any
consequential damage due to an improper
installation.
INSTALLATION
INSTRUCTIONS FOR USE
•
To remove any residue from the oven that may have been left from the manufacturing
process, you should select the gas oven and set it to its maximum temperature setting.
•
It is perfectly normal for a smell to be produced during this process.
•
You should make sure that any windows in the room are left open during this process.
•
It is advisable for you not to remain in the room whilst the burning off process is taking
place.
•
You should leave the oven on maximum setting for 30 - 40 minutes.
The oven is fitted with
i. a lower heating element;
ii. an upper heating element, which according to the cooking mode can be used for grilling or
baking.
All functions will start after selecting the oven temperature with the thermostat knob.
FUNCTION SELECTOR KNOB
The function selector knob has different possible settings for a variety
of cooking needs as per different models.
Grill
It is used for grilling and gratinating traditional food. This function must
always be used with half-open door and control protection in position.
Medium grill
It is used for grilling and gratinating small quantities of traditional food. This function can be
used with closed door for very short times (5-10 minutes). For longer times, this function must
always be used with half-open door and control protection in position.
Lower heating element
This function is particularly used for cooking from the bottom, warming up food or sterilizing
glass jars. It is also used for food requiring long and slow cookings, i.e. casserole. This function
0
can be used between 50 and Max C.
Natural convection
Both the lower and upper heating elements operate together. This is the traditional cooking,
very good for roasting, ideal for biscuits, baked apples and crisping food. You obtain very good
0
results when cooking on a shelf adjusting the temperature between 50 and Max C.
Rotisserie
It is used for grilling food with the help of skewers. This function must always be used with half-
open door and control protection in position.
