13
with enamelled steel cover for faster cooking.
Before igniting the triple ring burner ensure that the burner
and cover are properly placed in position. If they are not
kept properly the burner might get deformed. (Such
deformation is not covered under guarantee).
In case of leakage of gas or any other defect, report to your gas
dealer and get the
checked/rectified by an authorised
person only.
Use a damp cloth to clean your
.
EasyCook
EasyCook
EasyCook
EasyCook
Make sure that there are no inflammables near the
.
When the
is in use check from time to time that it burns
normally.
While using a lighter to ignite the burner, keep a distance of
atleast 0.5 cm between them to prevent gas from burning in
the Gas pipe. In case this happens, immediately switch off
the burner
Do not close the lid when burners or electric plates are hot.
Make sure that when the glass is hot, there should not be
any dripping of cold water or liquid on glass as it may
damage the glass.
The breakage of glass due to any reason is not covered
under guarantee.
and re-ignite
12
Your Gas Cooktop
Installation
The gas cylinder should be placed vertically and should not tilt.
The
should be placed at a convenient working height
against a wall. It should be kept away from shelves and curtains
Windows should be closed and the use of fans should be avoided
during its operation.
The flexible tube connecting the cylinder to the
should be
gas resistant and of an approved brand. It should not be longer than
a meter and should be kept away from any source of heat. The tube
should not be subjected to external pressure, twisted or sharply
looped
When the
is not in operation ensure that the regulating
knobs on the
are in the ‘OFF’ position and the regulating
valve on the cylinder is ‘CLOSED’
Push the rubber hose onto the inlet nozzle as far as it will go.
EasyCook
EasyCook
EasyCook
EasyCook
To light the
, open the regulating valve, light a match stick
and hold it close to the burner port. Now press the corresponding
regulating knob and turn it anticlockwise to the ‘ON’ position.
The Auto Ignition models are provided with India’s first one touch
multi-spark battery operated auto ignition (no electric connection
required). Just turn the knob to put on the flame.
In case the Auto ignition does not work replace the battery.
In some models, separate push button switch is provided for ignition.
Turn the knob ‘ON’, simultaneously press the switch to put on the
flame.
To turn off the flame, turn the regulating knob to the ‘OFF’ position.
During cooking, ensure that the ingredients being cooked do not
overflow, which may extinguish the flame or choke the burner ports.
The Glen
(TR models) has a high energy triple ring burner
EasyCook
EasyCook
How To Use
