Glen Dimplex new world, Руководство пользователя и инструкция по установке

Страница: 12 / 20

INSTALLATION INSTRUCTIONS - DUAL FUEL
13.210
Your appliance will be fitted with one of the two terminal blocks below, Block A, Block B
The flexible mains lead is supplied connected to a BS 1363 fused plug.
If this plug does not fit in the socket in your home, it should be replaced by a suitable
plug as outlined below
The wire which is green and yellow must be connected to the terminal marked
E (Earth)
or coloured green.
The wire that is coloured blue must be connected to the terminal marked
N (Neutral) or
coloured black.
The wire which is coloured brown must be connected to the terminal marked
L
(Live) or
coloured red.
The plug and socket must be accessible after installation.
Should the mains lead ever require replacing, we recommend that this is carried out
by a qualified electrician who will replace with a lead of the same size and temperature
rating.
Important: Ensure that you route all mains, electrical cables and flexible tubing well
clear of any adjacent heat source.
CONNECT TO THE GAS SUPPLY
The inlet to the cooker is ½” BSP internal situated at the rear right corner. Fit the bayo -
net connection. This should be located so as to ensure that the flexible connector hose
does not kink.
Under no circumstances should the flexible connector be allowed to come into contact
with the vertical oven flue tubes on the rear of the appliance.
Use a 900mm - 1125mm length of flexible connector.
Ensure that all pipe work is of the correct rating for both size and temperature.
Flexible connections should comply with BS 669. Parts of the appliance likely to come