Glen Dimplex Blaze B400, Руководство по эксплуатации

Страница: 13 / 16

11
9. FAN REPLACEMENT
Over the life of the heater, the fan may fail or
become less efficient. In the event that the fan
fails, it will need to be replaced.
Unplug the power lead before proceeding.
To replace the fan:
1. Using the 8mm hex key supplied with the
replacement fan – remove the M12 button
head screw holding the fan in place.
2. Slide the fan assembly outwards from the
rear of the heater. When out, unplug the
cable to disconnect the fan.
3. Connect replacement fan cable. Slide the
new fan assembly in from the rear of the
heater, guiding the cables into the centre.
4. Secure fan with M12 screw from step 1.
10. RECEIVER REPLACEMENT
Over the life of the heater, the fan receiver may
fail. If this occurs, it will need to be replaced.
Unplug the power lead before proceeding.
To replace the fan receiver:
1. Using the supplied 4mm hex key - remove
the two M6 button head screws holding the
receiver box in place.
2. Unplug the two plugs to the receiver.
3. Undo the two M6 hex nuts holding the
receiver plate to the receiver box.
4. Reinstall the new receiver by repeating
steps 1-3 in reverse.