gledhill Torrent T144 DE, Инструкции по проектированию и установке

Страница: 14 / 20

Page 14
SERVICINg
WATER RELATED COSTS CAN BE REDUCED BY gOOD
PLUmBINg PRACTICE.
Vast quantities of water are needlessly run off to waste
due to Taps, Mixers and Showers discharging flow rates
far in excess of the rates required for them to perform
their duties.
The contrasting flow rates shown on this leaflet clearly
illustrate the savings that can be made whilst still providing
a good performance.
British made Aquaflow Regulators provide constant flow
rates by automatically compensating for supply pressure
changes between 1 bar & 10 bars.
To facilitate installation into the wide range of plumbing
equipment which is encountered in the U.K, Four Fixing
Options are available:-
1. MXF “DW” Range - For fitting behind Fixed Shower Heads
or onto Flexible Hoses for Handshowers (preferably onto
the inlet end when lightweight hoses are used).
2. Compression Fitting Range. “In Line” regulators as in
Option 4 for Taps & Mixers.
Information by courtesy of
AqUAFLOW REgULATORS LTD
Haywood House, 40 New Road, Stourbridge, West
Midlands DY8 1PA
TELEPHONE (01384) 44611 FAX: (01384) 4461
WATER SAVINgS
OPTIONS FOR SHOWERS
4 FIXINg OPTIONS FOR TAPS &
mIXERS
1. MK Range - Combined Regulators & Aerator
for screwing onto Taps & Mixers with internal
or external threads on their noses. Anti Vandal
models also available.
2. MR05-T Range - Internal Regulators. Push-fit into
Tap or Mixer seats. Produced in three sizes - 1.5mm
(BS1010), 1mm & 10mm, Flangeless models also
available for Taps with Low Lift washers.
3. M X F St a n d a rd R a n g e - S c re w o n t a i l
models for Taps & Mixers. Fix onto the tails
before fitting the tap connectors. Available in
3/8", 1/", 3/4" and 1" BSP.
4. Compression Fitting Range - “In Line” regulators
housed in 15mm & mm CXC Couplers &
solating Valves. “ ”UK WFBS listed by the
Water Research Centre. Isolation valves available
for slotted screwdriver operation or with coloured
plastic handles.
Now available also in plastic bodied
push-fit couplers & valves.
TAPS & MIXERS
OVER
20 L/M
5, 6 OR
8 L/M
2 TAP
HALF OPEN
Fitted with regulator Unregulated
Unregulated
25 - 30 l/m
Regulated
10 - 12 l/m
SHOWERS
2
2
2
1
1
1
3
4
3
1