GLD Products STORMSTRIKE SPACE SAVING BILLIARD TABLE, Руководство по замене запасных частей

Страница: 9 / 21

GLD Products Space Saving Billiard Table
Item 64-6033
9 1-800-225-7593
www.gldproducts.com
STEPS TO ATTACH THE LEG BRACES
1. Position one of the leg braces (#4) between the two straight legs (#3).
2. Use four bolts (#10) with washers (#11) to go thru the legs (#3) and into the nuts in the
leg brace (#4). Finger start the bolts (#10).
3. Position the second leg brace (#4) between the two "L" shaped legs (#2). Repeat
step 2.
4. Place the third leg brace (#4) between the two "L" shaped legs (#2). When the table is
turned over this will be the leg brace that is closest to the ground.
5. Use four bolts (#10) with washers (#11) to go thru the legs (#2) and into the nuts in the
leg brace (#4). Finger start the bolts (#10).
6. Tighten all of the bolts (#10).
7. Test the swing action on both leg pairs. On one leg pair at a time, loosen the wing bolts
until the inside nut (#13) makes contact with the inside of the leg. The locking disks
should be able to rotate over each other. The leg assembly should pivot on the two wing
bolts.
8. Repeat step 7 on the second set of legs.
9. Return both leg pairs to the up position and tighten the wing bolts.
4
11
10
5
4
Loosen wing bolts
to swing legs.
2
3
Step 2
4X
Step 6
12X
Step 5
4X
Step 3
4X