14
Step 1
Outside
Step 2
Outside
Step 2
Outside
Slide Safety Stops to one side before attempting to install Glass Panels.
Panels fill not fit into Header with Safety Stops on the way.
Installing the Inner Glass panel.
Standing inside of Tub/Shower, Position the Glass Panel on front of Tub/Shower Enclosure
with the Rollers facing IN Tub/Shower Enclosure. Holding the Glass Panel by the sides,
lift it up into the underside of the header, between roller ledges.
Working under a slight angle will make it little easier. (
Step1
)
With the Glass Panel in vertical position move it toward the inner Track Ledge
making sure that rollers are above the ledge. Bring the glass down(
Step2
), letting rollers to get on
the ledge and inside the track (
Step 3
). Slowly release, allowing the glass panel to hang from the header.
At this point, if released, glass will not hang vertically, but under an angle.
While Holding the Glass vertically Slide the Glass Panel back-and-forth in the track.
Make sure that the rolling is smooth and easy.
The Inner Glass Panel must be located on shower head side.
Glass hangers are installed on to glass panels at factory.
Warning:
The Glass Panels are heavy and awkward. It is recommended that two
people lift and hang the glass panels.
DO NOT LIFT GLASS PANELS BY THE TOWEL BARS/PANEL PULLS.
