Glasdon ICEMASTER 25 Скачать руководство пользователя страница 5

Страница: 5 / 8

Attach the Connector Rod (ITEM 10) to the Wheel Assembly Frame (ITEM 4) together

with the Frame Braces (ITEM 6 - 2off) using the M6 x 45mm Bolts (ITEM 24 - 2 off). The

fixings screw into an internal thread on the inside of the Connector Rod. Fix the Frame

Braces to the Hopper Frame (ITEM 7) using the M6 x 35 Bolts (ITEM 8 - 2 off) - Do not fully

tighten yet.

ITEM 24

Fit the Inner Axle Bush (ITEM 11)

onto the right side of the Axle.

The Axle Bush (ITEM 5) should

be prefitted inside the Wheel

Assembly Frame (ITEM 4). Slide

the Inner Axle Bush until it slots

inside the Axle Bush in the

Frame.

Fit the remaining Inner Axle

Bush onto the left side of the

Axle. Again, slot the bushes

together snugly.

Fit the Wheels (ITEM 12 - 2 off)

onto the Axle. Begin with the

right hand Wheel and secure

in place using the M5 x 45mm

Bolt (ITEM 13) and M5 Lock Nut

(ITEM 14). Tap on the Axle End

Cap (ITEM 15) using a rubber

mallet. Repeat for the left

Wheel - inserting the 16mm

Flat Washer (ITEM 16) prior to

attaching the Axle End Cap.

ITEM 6

ITEM 8

ITEM 10

ITEM 5

ITEM 11

ITEM 13

ITEM 15

ITEM 16

ITEM 14

ITEM 12

ITEM 7

ITEM 4

Содержание ICEMASTER 25









Результаты поиска

Содержание ICEMASTER 25

Отзывы:

Похожие инструкции для ICEMASTER 25

Бренды по названию

Популярные бренды

Glasdon ICEMASTER 25, Инструкция

Результаты поиска

Содержание ICEMASTER 25

Отзывы:

Похожие инструкции для ICEMASTER 25

Бренды по названию

Популярные бренды