GlammFire.
PAG./17
5.6—Filling system (Option)
5.6.1—Local filling system
If your Crea7ionEVO PLUS has a local filling system, please follow the following steps to install it correctly:
Attach the hose provided (Figura 4) in the quick coupler, located next to the tank(Figura 11).
Place the other end of the hose, with its own filter, in the bioethanol jerry can.
At this point, you can fill the fireplace, pressing continuously the filling button until the green light appears, indicating
that the tank is full and the system is switched off automatically.
Attention
: When the green light appears, you should stop pressing the button, otherwise there is a risk of having a
fuel overflow.
Note:
The filling time of the local filling system is approximately 60 sec/liter.
Filling hose
Quick coupler
Filling button
After filling the fireplace, remove the hose, close the fuel cap and you can use the Crea7ionEVO PLUS normally.
Filter
Quick coupler
Figura 10
—Filling hose
Figura 11
— Filling system
