Installation
2
Installing the faucet assembly
□
Insert the washers (D) into the faucet body (A),
and then wrench-tighten the faucet body (A) to
the connectors (C).
4
1
Installing the connector
CAUTION:
Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Wrap thread sealant tape (not included) around
the stub out pipe threads (1) extending from the
wall in a counterclockwise direction, as shown.
□
Place the flange (B) onto the connector (C) and
wrench-tighten the connector (C) onto the stub
out pipes (1) extending from the wall (do not
over tighten).
□
Clean the mounting surface.
1
7 in. to 9 in.
B
C
A
D
C
