HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
5
Installation (continued)
4
Installing the drain body
□
Place the drain flange (K) into the drain hole
of the sink, make sure the rubber washer (L)
under the drain flange (K).
□
From underneath the sink, screw the drain
body (O) onto the drain flange (K). Ensure that
the opening (1) for the ball rod on the drain
body (O) faces towards the rear of the sink.
3
Preparing the pop-up assembly
□
Remove the pop up stopper (J)
,
drain flange (K)
and rubber washer (L) from the drain body (O).
□
Screw the lock nut (N) in a counter-clockwise
direction, and push the rubber washer (M)
down.
□
Screw the lock nut (N) in a clockwise direction,
and push the rubber washer (M) up to tighten
the drain body (O). Do not overtighten.
J
K
L
M
N
O
2
3
1
1
2
K
L
M
N
1
O
3
