HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
5
Installation (continued)
3
Connecting the quick connect
adaptor and water line
□
Thread the quick connect adaptor (F) onto the
end of the faucet assembly (A) stud, and tighten
securely using a wrench.
□
Connect the 3/8 in. water line from the filtration
system by pushing the line into the quick
connect adaptor (F).
A
□
Pull down on the 3/8 in. line slightly to ensure
the quick connect fitting has engaged.
3/8 in. Water line from
filtration system
F
4
Connecting the supply lines
A
□
If a drain line is required to run through the
faucet's integral air gap for a reverse osmosis
(RO) system, connect the 1/4 in. drain line from
the unit to the smaller barb on the the bottom of
the faucet assembly (A). Connect the 3/8 in. line
from the faucet assembly (A) to the drain. This
drain line works by gravity. Make it as short and
straight as possible, with no dips or loops.
Sink
3/8 in. Outlet Tube
1/4 in. Inlet Tube
NOTE:
This option is only used in a Reverse Osmosis
system. Do not use 1/4" and 3/8" barbs in normal
installation. They do not need to be capped or altered.
NOTE:
In this installation the angled barbed connectors
are not used.
