to delete characters you have typed, press CLEAR; press ENTER to submit the characters you have typed. You can
also use the numeric keypad to enter TV channels.
2.3 VFD Installation Guide (A381 VFD version)
Please connect your VFD module to USB2.0 port on the motherboard and also connect power to VFD device as
showing below. After connecting USB2.0 and power to your VFD module please installing the driver. (Note: This
module only support Vista O/S which has MCE version)
2.4 IR, IR Bluster Installation Guide (A381 standard, A381 VFD version)
Please connect your IR receiver to USB2.0 port on the motherboard. The IR receivers no need to install the driver
but only support Vista O/S which has MCE version. If you want to use IR blaster to learn your other Media devices’
Remote controller, please connect the IR blaster device with your IR receiver. Followings are the learning guide of
MCE remote controller,
The TV Power, VOL+, VOL-, Numeric keypads (0 through 9), CH+, CH-, and Mute buttons on the remote control for
Media Center PC and “learn” IR commands from other remote controls. This feature lets you use the Media Center
Remote Control sends commands to your TV or another device, such as an audio receiver or home stereo set.
※
Important:
z
By default, the VOL+, VOL-, Numeric keypads (0 through 9), CH+, CH-, and Mute buttons on the remote
control for Media Center PC control the system volume and channel on your computer, and the TV button
has no command assigned to it until it “learns” one.
z
Do not perform this procedure in bright natural or artificial light.
To program buttons on the remote control by using the learning feature
1. Place the remote control for Media Center PC head to head (approximately 5cm apart) with the remote control
from which it is learning.
2. On the remote control for Media Center PC, press and hold the DVD MENU button and then press OK button,
and right after you release both buttons you will see the Green LED turns on for 5 seconds.
The remote is now in learning setup mode.
IR Bluster
