17
Water is leaking.
• Bottle may have a leak. Remove bottle and replace with new bottle.
• If leak remains, remove probe from bottle and call 888-828-1426 for assistance.
Push buttons are stuck and/or faucets are leaking.
• Apply mineral oil (baby oil) to button slides to reduce friction.
Cold water is not cold.
• It takes up to two hour after setup to dispense cold water
.
• Make sure the back of the dispenser is at least 4 inches from a wall and there is free airflow on
all 4 sides of the dispenser.
• Make sure energy saving switch is ON.
Hot water is not hot.
• It takes 15-20 minutes after setup to dispense hot water.
• Make sure the power cord is properly connected to a working outlet.
• Make sure energy saving switch is ON.
LED nightlights are flashing and dispenser is making beeping noises.
• Replace empty bottle. If unavailable, leave door ajar or unplug cooler to stop beeping noise
and flashing lights.
• There may be an air leak. Check hose connections.
Dispenser is noisy.
• Make sure dispenser is positioned on a level surface.
Water tastes bad.
• Drain water from reservoirs and replace bottle with a fresh one.
• Clean dispenser per Proper Care & Cleaning instructions.
