Power In
Sub Router2
Pair routers
Plug in power & Internet cable
Mesh network
You can pair two routers by pressing their
Mesh Buttons
at the same time. The pairing
starts right after their
Mesh LED lights
start blinking. After 2 minutes, their mesh lights
will be solid indicating the mesh network is ready. You can pair another router with the
main router by following above steps.
The mesh network works among routers when their
Mesh LED lights
are solid. Home
materials and layout can affect how Wi-Fi signal travels. You might need extra
routers to get full Wi-Fi coverage if you have a long narrow layouts and thick walls.
If you have more than one GL-B1300 router, you can set up a mesh network. In a mesh network, the routers will
share same Wi-Fi names (SSID) for 2G and 5G Wi-Fi networks.
WAN
MESH NETWORK SETTINGS
By default, the router with Ethernet cable plugged into its WAN port is the main router. You need to reset the router to change
your main router or release a router used to be in a mesh network.
Power In
Blinking - mesh network is setting up
Off - mesh network is off
Solid - mesh network is ready
WAN
2G + 5G
2G + 5G
2G + 5G
Power In
Main Router
Main Router
Main Router
Power In
Sub Router1
The router with Ethernet cable plugged into its WAN port is the
Main Router.
The other routers without
Ethernet cables are
Sub Routers.
Sub Router1
Sub Router1
Sub Router2
