gk-medizinmechanik GK Magic 1000, Руководство пользователя

Страница: 8 / 24

7
Functions
■ Functions
How the control panel works
Generally we can say that a lit button signals the availability of
the corresponding function (with the exception of Sound & Vision -
for details see the corresponding chapter). When you press the
button you activate its function and the light starts flashing. To
stop the function, just press the button again. When there is no
backlight behind the button, then the function is not available at
the moment (for instance: disinfection is not available when the
tub is full).
Standby mode
If the tub is empty and for 10 minutes no function is activated
(or in case that the main switch of the bathtub has been switched
on), then the bathtub goes into standby mode. In this mode all
functions are deactivated (with the exception of Sound & Vision,
which gets “frozen” in the state which it is in at that moment)
and locked. Only the sensor “ACTIVATION CARD” is illuminated with
a green backlight.
The standby mode a) prevents unauthorized use of the bathtub and
b) helps to save energy since due to the deactivation of almost
all functions the bathtub uses less electricity.
In order to return to normal mode, please, use the activation card
(see next subchapter).
Activation card
To use the tub again when in standby mode, gently
swipe the magnetic activation card over the green
backlit sensor “ACTIVATION CARD”. After 1­2 seconds
the device should return back to normal mode.
Note: Optionally you can also reactivate the bathtub without
the activation card. This option can be set in program
mode. If it has been turned on, then you can reacti-
vate the bathtub by pressing any button. (In case that
the function behind the pressed button is available,
it will also get activated immediately, e.g. raising
and lowering.) This means that with this option turned
on, the standby mode only helps to save energy but
does not prevent unauthorized use of the bathtub.