gk-medizinmechanik GK Magic 1000 Скачать руководство пользователя страница 20

19 

Troubleshooting 

■ Troubleshooting 

 

Tub fill doesn’t work even though the function is active and the 
light is flashing. 

Check all the sieves and valves for dirt. If the problem still ex-
ists, then the electronic has to be checked. Contact 

your GK rep-

resentative

.

 

 

The temperature regulation doesn’t work properly. 

The thermostatic mixer is adjusted at 3 bar water pressure at both 
supplies. If you have different water pressure it may be necessary 
to do a readjustment. If the water pressure is about right, possi-
bly the cartridge is defective and has to be changed. 
 

Very little water runs into the tub. 

If the hot and cold water supply pressure deviate too much from 
each other, then the mixing valve cannot work properly.

 

 
Disinfection doesn’t work and the button is flashing very fast 
(about 4x/sec.). 

The disinfectant container is empty. Replace it with a full disin-
fection container. 

 
Disinfection doesn’t work and the button is flashing very fast 
(about 4x/sec.) even though the container is full. 

The disinfection sensor is defective and has to be replaced.

 

 
All the functions are disabled except the “UP” and “DOWN” buttons. 

Probably the tub is still in the disinfection cycle. Finish the 
procedure properly. 
 

No shampoo or bath additive is dispensed even though the button is 
flashing when it is pressed. 

If the corresponding box is not empty, then there probably is air 
in the tubes. Press the corresponding button for a longer time. 

 

The hydromassage/ultrasound button doesn’t light up (with hydro-
massage/ultrasound being installed) even though there is more than 
enough water in the tub.  

The fill level sensor is defective and has to be changed. 

 

The tub fill does not stop automatically. 

The fill level sensor is defective and has to be changed.

 

 

All the functions are disabled except the “DOWN” button and the 
symbol “MISSING POWER SUPPLY” is lit. 

No power supply detected. Try to solve this problem as soon as 
possible since otherwise the emergency battery will be completely 
emptied.

 

Содержание GK Magic 1000

























Отзывы: