Running a program
15
Code no. 576074
Rev. nº 03/0418
DANGER! (AUSTRALIA ONLY)
According to A.G.A specs:
Do not use or store flammable materials in the appliance storage drawer or near this appliance.
Do not spray aerosols in the vicinity of this appliance while it is in operation.
Do not modify this appliance.
This appliance shall not be used to dry off solvents or drycleaning fluids.
4.1. Connecting the energy sources
Turn on the dryer’s external power supply switch.
Switch on the dryer breaker switch (machines with breaker switch).
Open the manual gas inlet valve (gas heated dryers only).
4.2. Load the machine
Group the fabrics to be dried into homogeneous loads. Avoid mixing articles of different thicknesses and
moisture level, since this will slow down the drying to the detriment of fine materials.
To aid the movement of air through the inside of the drum, the load must not exceed the nominal capacity.
Nominal capacity by models (Load ratio 1/20):
CAPACITY
MODEL
ED260
ED340
ED460
ED660
ED900
ED1250
kg
13
17
23
33
45
62.5
lb
28.7
37.5
50.7
72.8
99.2
137.8
Do not dry linen with accessories that cannot be machine dried.
It is not advisable to mix whites with other colours.
It is not advisable to mix items of different fabric or thicknesses, especially when programs with moisture
control are used.
Check labels and/or characteristics of the garments or fabrics to be dried and choose a program in
accordance with these characteristics.
Ensure that the dryer’s filter is clean. Remember that a dirty filter reduces the dryer’s performance.
Open the door and load the machine.
4.2.1. Guidelines for the prevention of risks in loading and unloading
See the dryer measures and the heights of the work areas in the corresponding Installation Instruction
Manual.
To prevent risks due to high temperature, hands must be protected with heat-insulated gloves.
Follow the legislation and regulations for health and safety in the workplace in force in the country where the
machine has been installed.
