Program execution mode
17
Code no. 576017
Rev. nº 02/0415
4.2. Information displayed while the program is running
This includes the drying and cooling down phases.
The time remaining for the program in minutes is displayed in the centre of the icon.
Drying phase.
The heating system maintains the programmed temperature.
Cooling-down phase.
4.3. Program pause
The program pause allows the user to halt the rotation of the drum and check the level of
moisture in the linen.
Program pause operation:
Halts the rotation of the drum and turns off the heating system.
Pressing the PAUSE button again resumes the drying phase.
If no action is taken for twenty seconds after the pause command, the cycle resumes.
DANGER!
Do not open the door while the drum is turning.
4.4. Increasing the drying time
During the cycle, the drying time can be increased by inserting coins or tokens or increasing the payment via
the central vending unit.
The increase will be proportional to the number of tokens inserted or the amount paid.
To enable this feature, the
+min
option in Sections 7.1.2 and 7.1.3 needs to be activated.
See also the
COUNT OVERPAYMENT
option in the
OPTIONS
menu (Section 7.1.2).
4.5. End of the cycle
Once the cooling stage has ended, the machine informs the user of
the end of the drying cycle acoustically and on screen.
Precautions at the end of the drying cycle.
N.B. It is very important:
To remove the linen from inside the dryer without delay. This will
prevent creases in the fabric and reduce the risk of spontaneous
combustion.
To clean the lint filter on a regular basis. Lint prevents extraction
and reduces the performance of the dryer. Use the indication for
periodic cleaning of the lint filter in the General Settings
Configuration menu (Section 7.1.1). Further information about
cleaning the filter can be found in Chapter 11.
Do not cancel the cooling-down phase.
