Girard Systems NEWMAR SERVICE SCHOOL, Быстрый старт

Страница: 6 / 16

6 | P a g e
1. (Figure 9)
5. Approximately ¼ turn of the adjustment screws represents about 1” of
awning movement. NEVER set outward limits so that the fabric is slack with
full arm extension. For proper adjustment set limit switch to stop the motor
just before the arms lock. This will expose about an 1/4” gap at the elbow.
B. ADJUSTING PITCH and ARM (Elbow) HEIGHTH
NOTE: This adjustment is usually required after an arm replacement. Also, when
the elbow of the arm hits the bottom of the casing as the lead rail closes.
Tools Required

19mm (3/4”) open-end wrench