English
CCD-0006001 Rev: 05-16-22
- 7 -
Cabinet Cutout Instructions
For proper operation of your cooking appliance, the cabinets must be
properly constructed and squared with respect to the counter top and
the cabinet face.
For proper operation of these units, the cabinet must be level and
include a separator/support shelf under the range.
NOTES:
When planning the location, consider curtains or other
combustible materials installed around the appliance so as not to create
a fire hazard.
The minimum horizontal distance(s) from sides and back of appliance to
adjacent vertical combustible walls extending above the top panel:
Item
Dimension
A
71/4" Min. (184mm Min.)
B
8" Min. (203mm Min.)
NOTE:
These distances shall be from the burner center of the appliance.
30" (
762m
m)
From
botto
m of
overh
ead c
abine
t
to co
oking
surfa
ce
WARNING
The minimum vertical distance to combustible material above
the range cooking top is 30" (762mm), provided the overhead
construction does not extend 15" (381 mm) from the rear wall. The
recommended distance between the floor and the bottom of the
cutout opening is 4" (102mm).
NOTE:
If installing a range hood or microwave hood combination
above the cooking surface, follow the range hood or microwave hood
combination installation instructions for dimensional clearances above
the cooktop surface.
Cabinet and counter cutout dimensions:
Item
Dimension
A
173/4" (451mm)
B
20
1/8
" (511mm)
C
16
1/8
" (410mm)
D
15/16
" (23mm) max.
E
11/2" (38mm) max.
F
4
5/16
" (110mm)
G
3
9/16
" (90mm)
F
F
F
A
B
D
E
C
Gas Hose Hole
Separator Shelf
F
G
Oven Installation
When the cabinet has been prepared according to the dimensions given
and the gas line is in place.
1. Take your range oven out of the carton and place on a flat surface.
Remove the packing materials.
2. Hold the baffle and pull upward to release the top glass cover
assembly from the oven. (Fig. 1)
Fig. 1
