-
Temperature-dependent sun protection possible
-
Scene buttons for sun protection and twilight
-
Brightness measurement via brightness sensor
-
Sends brightness values to the eNet server if brightness changes more than 50 %
-
Test operation for adjusting protection and temperature threshold
-
Solar-powered device
-
Integrated battery as energy store
Can be set with eNet server:
-
Operation locks
-
Behaviour of actuators when a scene is removed
Supplementary functions with eNet Server
-
Fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
-
Update of the device software
-
Reading of error memory
Sun protection
The sun protection function allows automatic lowering of a blind/shutter in strong sunlight.
If a set sun protection value is exceeded for more than 2 minutes, the sun protection sensor
transmits the "Sun protection" scene and the blinds move to their previously-saved sun
protection position.
If the brightness falls below the set sun protection value for longer than 15 minutes, then the
blind/shutter will move upwards again.
i
The active sun protection function can be disabled by manually moving the blind/shutter.
The blind/shutter is then no longer moved automatically when the sun protection value is
undershot.
i
It is only possible to integrate switching and dimming actuators into the sun protection with
the eNet server.
Sun protection, temperature-dependent
Temperature-dependent sun protection cab primarily be used in the colder months of the year.
The shading of the interior is triggered when the set temperature value is exceeded, in addition
to the sun protection value. After triggering the sun protection, the temperature evaluation is
deactivated.
Twilight
When darkness begins, the twilight function allows automatic lowering of a blind/shutter or
lighting switching. If the set twilight value is undershot for more than 4 minutes, the "Twilight"
scene is opened.
If the set twilight threshold is exceeded for approx. 15 minutes, the blind/shutter moves upwards
or the lighting switches.
To allow the blind/shutter to move upwards automatically, also at dawn, position the sun sensor
so that it is not in the shadow of the blind/shutter.
4 Operation
i
Before each operation, remove the cover and then attach it again afterwards.
i
When operating with the eNet Server, operation and signalling could vary from what is
described here.
Triggering a sun protection scene
o
Press the
3
(5) button.
The sun protection scene is opened, irrespective of the current brightness.
i
The sun protection is only lifted automatically when the sun protection value has been
exceeded for more than two minutes and then undershot.
Triggering a twilight scene
o
Press the
2
(4) button.
The twilight scene is opened, irrespective of the current brightness.
32582922
10864960
24.03.2017
2/7
Wireless Solar sun sensor
