Configuring KNX functions
Order No. 5201 00
Page 9
4. Configuring KNX functions
4.1. Configuring KNX devices
The alarm control unit Connect is a product of the KNX system and complies with the KNX guidelines.
Detailed specialist knowledge is required. The alarm control unit Connect is a security system for an
existing or newly installed KNX system.
Initial start-up is performed via ETS 5 or higher.
Notes
• You can find the KNX product database and the technical documentation on the internet at
www.download.gira.de.
KNX/IP uses Multicast to mirror KNX bus group communication on IP. To couple the alarm control unit
Connect with a twisted pair bus (TP bus), always use a KNX IP router.
Tip
Faster configuration via direct IP connection
• In ETS 5, select Options under the Bus tile and check whether Use direct IP connection if available
is activated. This will make transmission of the KNX configuration from the ETS to the alarm control
unit Connect faster.
