System 3000
RF operating top unit
3
Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed tech-
nical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The function of this device depends upon the software. Detailed information on loadable soft-
ware and attainable functionality as well as the software itself can be obtained from the manu-
facturer´s product database.
The device can be updated. Firmware can be easily updated with the Gira ETS Service App
(additional software).
The device is KNX Data Secure capable. KNX Data Secure offers protection against manipula-
tion in building automation and can be configured in the ETS project. Detailed specialist know-
ledge is required. A device certificate, which is attached to the device, is required for safe com-
missioning. During mounting, the certificate must be removed from the device and stored se-
curely.
The range of a radio system depends on various external circumstances. The range can be op-
timised by the choice of installation location. The product documentation and system document-
ation for this device contains application basics for the KNX RF system.
Planning, installation and commissioning of the device are carried out with the aid of the ETS,
version 5.7.5 and above.
Intended use
–
Operation of loads, e.g. light on/off, dimming of brightness and colour temperature, colour
control with colour run and brightness adjustment, Venetian blinds up/down, value trans-
mitter 1 byte, 2 bytes, 3 bytes and 6 bytes, brightness values, temperatures, calling up
and saving of light scenes
–
Operation in cabled KNX systems via media coupler (see chapter Accessories)
–
Operation of switching, dimming, Venetian blind or room temperature insert or 3-wire ex-
tension of the System 3000
Product characteristics
–
Activation of blind/shutters, with Venetian blind insert
–
Switching and dimming of lighting, with switching or dimming insert
–
Dimming and colour temperature control of lighting, with DALI insert TW
–
Room temperature control, with room temperature control insert
–
Push-button sensor functions switching, dimming, colour control, Venetian blind, value
transmitter, scene extension, 2-channel operation and controller extension adjustable
–
Two or four push-buttons for rocker or push-button function
–
Controller extension with adjustable operating mode selection, forced operating mode
switch over, presence function and setpoint shift
–
Status LED – optionally red, green, blue – adjustable per rocker
–
LED functions orientation lighting and night reduction can be set separately
–
Brightness of LED adjustable and switchable while in operation
–
Disable or function switch-over of all or of individual button functions possible with dis-
abling function
–
Temperature measurements optionally with device internal sensor and external sensor
connected via communication object (only with suitable inserts)
Temperature measurements are only possible in combination with the following inserts:
- "Relay switching insert"
- "Electronic switching insert"
- "Flush-mounted DALI Power control unit insert"
- "Blind control insert with auxiliary input"
- "Blind control insert without auxiliary input"
3 / 12
32403802
10867449
10.11.2021
