UTENSILS & COOKING
CUSTOMER REVIEWS
HOW TO OPERATE
8
7
9
HOW TO OPERATE
Ginnys.com • 1.800.544.1590
8
9
CLEANING & CARE
9. Allow the mixture to churn until frozen or the desired consistency is
reached. This can take up to 30 minutes.
10. Switch off, then remove the power unit/lid. The ice cream is ready to
be served. It should be soft. It can be transferred to a separate
container for storage in the freezer, if you wish to firm the ice cream
before eating.
IMPORTANT:
• Do not stop and start the machine during the freezing process, as the
mixture may freeze in contact with the bowl and prevent movement
of the paddle.
• To avoid overheating the motor, the rotation direction will change
if the mixture becomes too thick. If the direction of rotation continues
to change, stop the machine because the ice cream is ready.
• In the unlikely event of the motor overheating, it will stop
automatically. If this happens, turn Off, unplug the machine
and allow the power unit to cool.
• Do not use metal utensils to remove mixture from the bowl.
• Do not remove the freezer bowl from the freezer until ready to
make ice cream.
Always switch Off, unplug and disassemble before cleaning.
• Never immerse the power unit in water or let the cord or plug get
wet.
• Do not wash in the dishwasher. This unit is hand wash only.
• Do not clean with scouring powders, steel wool pads, or other
abrasive materials.
FREEZER BOWL
• Allow the freezer bowl to reach room temperature before cleaning.
• Wash the inside of the bowl, and dry thoroughly.
Do not immerse in water.
PADDLE, DRIVE SHAFT & LID
• Remove the paddle and drive shaft from the power unit.
• Wash in warm, soapy water.
• Dry thoroughly.
POWER UNIT
• Wipe with a damp cloth.
