TROUBLESHOOTING
10
Ginnys.com 800-544-1590
Not hot enough
Enough time has not
been allowed for iron
to heat properly
The temperature dial
is set too low
The iron is not plugged
in
Wait until the preheat
light has gone off.
Set the temperature
dial to a higher
temperature.
Ensure the iron is
plugged in.
Leaking water from
the soleplate
The temperature dial
is set too low
The iron is not plugged
in
There is too much
water in the water
tank
Set the temperature
dial to a higher
temperature.
Ensure the iron is
plugged in.
Pour out the excess
water until the water
line is below MAX.
No burst of steam
The burst of steam
button has been used
too often within a
short period of time
The iron is not hot
enough
Continue ironing in the
horizontal position and
wait 5 seconds before
using the burst of
steam button again.
Set the temperature
dial to a higher
temperature.
Problem Cause
Solution
(continued on next page)
