8
Pinterest.com/GinnysBrand
HOW TO OPERATE
Note:
When using steam for the first time, DO NOT direct the
steam toward the item to be ironed. Factory dust may be
released from the steam holes on the bottom of the soleplate.
USING STEAM
1. Place the iron in a vertical position. Unplug and set the temperature
control dial to OFF.
2. Fill the water tank (see page 7).
3. Pull out the retractable cord and insert the plug into an electrical outlet.
The blue power light will come on.
4. Turn the temperature control dial to STEAM. The red preheat light will
come on, indicating that the iron is heating up.
5. When the preheat light turns off, the set temperature has been reached
and the iron is ready to use. During ironing, the preheat light will
automatically switch on and off as the thermostat maintains the set
temperature. It is fine to continue ironing during this process.
6. Move the steam control lever to the desired position: MIN (0), MED or
MORE.
7. Steam will be produced as soon as the iron is held horizontally.
8. When finished, turn OFF and unplug the iron,
9. Press the cord retract button to retract the cord.
USING BURST OR VERTICAL STEAM
1. With water in the tank, press the burst of steam button to generate a
powerful burst of steam that can penetrate the fabric and smooth the
most difficult creases.
2. By pressing the burst of steam button at intervals, you can also iron
vertically (for hung curtains or garments).
USING SPRAY
With water in the tank, press the spray button to spray water from the spray
nozzle to dampen fabric. You may have to pump the spray button several
times at first to start the spraying function.
USING A DRY IRON
DO NOT add water to the tank for ironing without steam or spray.
