___________________________________________________________________________________
WRMnano User Manual page
11
/
18
04 01 00 00 00 C2 16
It can be seen that it has 64 (0x40) activated devices of 64, and 50 of them are read
with their valid wireless m-bus telegrams.
4. Using GINEERS software to set WRMnano
To ease WRMnano setup user can use our standard m-bus software. The software
follows strictly m-bus standard and can be used for other m-bus related things, but it can also
help to use specific commands for WRMnano.
User should use only TAB "M-bus devices", which looks like below:
Fig. 1. General view and description
Using our software one can do the following with WRMnano:
activate or delete exact meter ID in WRMnano meter
delete all meters from WRMnano memory
set AES-128 key for each/all activated meter
turn On or OFF WRMnano flags and corresponding functions
set up to 8 filters for each FILTER activated
change Primary address of desired logical meter in WRMnano memory
