always used to validate and store a parameter in device
memory (“Enter”)
in client mode serves to send data via RS-232 interface to
external device (PC, controller, etc.) („Print”)
not
used
3.
Place for showing metrological parameters if the weigh scale, according to EN
45501:2001
и
OIML R76 (EEC 384)
4.
Plug for connecting external load cell
5.
Plug for connecting external device via RS-232 interface
6.
Plug for power supply cable – cable is included in the package
7.
Safety fuse
8.
Warranty sticker
9.
LEDs for showing current weighing status – Gross
/Net, Zero, Stable position
10.
*Button for entering in service mode – accessible only if front ring is removed
G5102 fulfils requirements of precision class III for measuring weight, but can be
used also for more precise measurements. Basic sub-devices and functions (according to
EN45501:2001 terminology) are:
initial zero setting device;
device for determine stable position;
device for semi-automatic zero setting;
zero tracking device;
device for semi-automatic tare (subtractive);
display auto-test;
significant error detection;
serial interface (RS-232);
setting device – calibration and fine weight correction
In next table are given all important technical parameters and permitted setting
values, according to weigh scale measuring standard (described more detailed in III.
Functions and Parameters)
Scale indicator G5102, v.1.1 – USER MANUAL
6 / 27
