Gina 2000-64K, Руководство пользователя

Страница: 5 / 17

GINA User’s Manual
Data Filter Selection
FL=01 FL=02 FL=03 FL=04
Factory Set to FL=02
RF Channel Selection
Channel selection should be the same on both slave and master.
CH=01~12
Transmit Key ON
TX=00 This setting is for normal operation.
TX=01 10 sec transmit - test purposes only
Transmit Clock Selection
CS=00 Internal transmit clock
CS=01 External transmit clock
CS=02 Loop back command (slave only). This means clock
and data lines are looped back. txd=rxd, ctxc=rxc
Data Speed Selection
DR=01 9.6 Kbps Synchronous
DR=02 19.2 Kbps Synchronous
DR=03 38.4 Kbps Synchronous
DR=04 56 Kbps Synchronous
DR=05 64 Kbps Synchronous. This setting is also used to
allow asynchronous data communication
automatically at speeds of 1.2 to 19.2 Kbps.
Revision of Software
This is factory set but may be determined by checking the Display Status.
The correct settings must be used.
RV=15
1-4
©1999 GRE America, Inc. All rights reserved. This material is the property of GRE America, Inc. Copying or
re-producing this material is strictly prohibited. All violators shall be prosecuted to the fullest extent of the law.
1/99