Operator
’
s Manual
MO080-IT
12/09/2017
Rev.3
Page 20 of 20
10
Clutch adjustment
The Product is sold balanced and does not require further adjustment. Nevertheless, if the movements of the arms
around the rotation joints becomes too stiff or too loose over time, such as to prevent the device remaining in position,
the different clutch systems can be adjusted to restore correct stability.
Use the Allen key to adjust clutch force at the rotation joints and, therefore, the consequent movement of the small
moving arms.
ROTATION JOINTS
ADJUSTMENT PROCEDURE
Using the Allen key, adjust the screw alongside the joint in question.
Turn clockwise to increase the force of the clutch and stiffen movement. Turn anti-clockwise to
reduce the force of the clutch and loosen movement. After making adjustment, movement
should be smooth and uniform.
The clutches on the horizontal arm can also be adjusted.
To adjust, use an Allen key and operate on the dowels on the arm hubs. To increase the force
of the clutch and make movement stiffer, turn clockwise.
To reduce the braking force and loosen movement, turn the Allen key anti-clockwise. After adjustment, the
rotation of both axes must be smooth and uniform.
Содержание PRIMALED SO
