35
Notes:
When strip is already inserted into the meter and meter is in the waiting for
sample application mode, at this point if data transfer cable is plugged into
meter data port then meter gives E-12 error message and does not
automatically turn to “PC” mode.
When meter is in “PC” mode, meter does not turn to waiting for sample
application mode after strip is inserted into meter.
3. Run the
GIMA
Diabetes Management Software, and refer to the instructions
from the software for how to transfer records.
4. During the data transfer, the meter will display “to” and “PC”. This indicates the
data is being transferred from the meter to the PC.
5. Once the data transfer is complete, the meter will display “End” and “PC”.
6. After data transfer from meter to PC is completed, press the
OK
button to turn
off the meter. If nothing else happens to meter 2 minutes after data transfer
from meter to PC is completed, the meter will automatically turn off. In this
case press both the
▼
or
▲
buttons to enter “PC” mode again.
Note: Peripheral equipment such as computer which is intended to be
connected with meter shall conform to relevant safety standard.
See the package insert included with your
GIMA
Diabetes Management Software
Kit for detailed instructions.