16
to confirm the first Test Reminder time and then go to the second Test
Reminder set up.
When the Test Reminder is “Off” during the second Test Reminder set up,
pressing the
OK
button will go to the set up of the third Test Reminder.
When the Test Reminder is “On”, pressing the
OK
button will go to the set
up of the time for the second Test Reminder. Press the
▼
or
▲
button to
adjust the second Test Reminder time. Press the
OK
button to confirm the
second Test Reminder time and then go to the third Test Reminder set up.
Repeat the same set up procedure for Test Reminder 3, 4 and 5.
After finishing the fifth Test Reminder set up, it will then end the setup
mode and power off the meter.
If one or more test reminders have been set, the reminder symbol will always
appear on the LCD screen when the meter is turned on. The display sample is
shown below.
The meter beeps 5 times at the time you set, again two minutes later, and two
minutes after that unless you insert a test strip or press any button. This
function will still work with Audio feature turned off.
When the meter beeps at the time set by the Test Reminder feature, the date,
time and strip symbol will be displayed. And the Test Reminder symbol will be
flashed. The display sample is shown below.
Note
:
For any step of the set up, if the
▼
or
▲
button is pressed and held, it
will allow a faster adjustment.
12. Post – Prandial Alarm Function:
The post prandial alarm function is an
optional function that you can use to setup a quick test reminder alarm. The
OR