background image

30

V1: Fourth inter-costal space at right border of sternum.

V2: Fourth inter-costal space at left border of sternum.

V3: Midway between V2 and V4.

V4: Fifth inter-costal space at left mid-clavicular line.

V5: Left anterior axillary line at the horizontal lever of V4.

V6: Left mid-axillary line at the horizontal lever of V4.

Clean the positions around to which chest electrodes are to be attached with 

alcohol, lay the ECG medical gel on dia.25cm area around the position 

and the edge of chest electrode cap, press the suction bulb, firmly attach 

the electrodes to the positions between V1 and V6.

Attention:

 The ECG medical gel coating should be separated, and the 

touching chest electrode may result in short circuit.

6.2.2 Limb electrode

Place the electrode on the hand and leg, clean 

the positions around to which limb electrodes 

are to be attached with alcohol, then lay 

some ECG medical gel on the cleaned skin.

 

Attention: 

Tighten the knob after inserting 

the mainframe patient cable pin in the patient 

cable socket.

6.2.3 Electrode connection definitions and color code: 

 Electrode 

Electrode 

Line 

Electrode  Socket

 Location 

Code 

Color 

Color 

Number

 

Right arm 

Black 

Red 

9

  Left arm 

Black 

Yellow 

10

  Left leg 

Black 

Green 

11

  Right leg 

RF 

Black 

Black 

14

  Chest 1 

V1/C1 

White 

Red 

12

  Chest 2 

V2/C2 

White 

Yellow 

1

  Chest 3 

V3/C3 

White 

Green 

2

  Chest 4 

V4/C4 

White 

Brown 

3

  Chest 5 

V5/C5 

White 

Black 

4

  Chest 6 

V6/C6 

White 

Purple 

5

ENGLISH

Содержание ecg80a






















Отзывы: