background image

15

14

WARRANTY

Gilson warrants this pipette against defects in material under normal 
use and service for a period of 12 months from the date of purchase. 
This warranty shall not apply to pipettes which are subject to abnormal 
use and/or improper or inadequate maintenance (contrary to the 
recommendations given in the User’s guide), including, but not limited 
to pipettes which have been subjected to physical damage, improper 
handling, spillage or exposure to any corrosive environment. This war-
ranty shall also be void in the event pipettes are altered or modified 
by any party other than Gilson or its designates. Gilson’s sole liability 
under this warranty shall be limited to, at Gilson’s sole option, repair or 
replacement of any defective components of pipettes or refund of the 
purchase price paid for such pipettes.

THE FOREGOING WARRANTY IS EXCLUSIVE AND GILSON HEREBY 
DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, 
INCLUDING ANY WARRANTIES OF MERCHANTABILITY AND ANY 
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, UNDER NO 
CIRCUMSTANCES SHALL GILSON BE LIABLE FOR ANY CONSEQUENTIAL, 
PUNITIVE, INDIRECT OR INCIDENTAL DAMAGES ARISING OUT OF ANY 
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY.

EC DECLARATION OF CONFORMITY

MICROMAN® E 

M10E, M25E, M50E, M100E, M250E, M1000E

Positive displacement 

Capillaries/Pistons

98/79/EC

on In Vitro Diagnostic Medical Devices

 

comply with the requirements of the following European 
Directives:

Villiers-le-Bel, June 20

th

, 2014

 

E. Chamault 

H. Le Dorze

 

General Manager

 

Quality Manager

GILSON S.A.S.

 

19, avenue des Entrepreneurs

BP. 145 - 95400 Villiers-le-Bel (France)

Tel.: +33(0) 1 34 29 50 00 

Fax: +33(0) 1 34 29 50 20

www.gilson.com

* Annex III, self-declared

 

The company,

Hereby certifies under its sole responsibility that the products 
listed below:

Содержание MICROMAN E M1000E










Отзывы: