Gilson F81013, Руководство пользователя

Страница: 38 / 54

PI
P
E
T
M
A
N
M
S
O
F
T
W
A
R
E
38
PIPETMAN M SOFTWARE
|
PIPETMAN® M
Default Task Parameters
Each task has modifiable parameters, defined as follows:
Aspirate and Dispense tasks have the following parameters:
●
Task name
(2)
: specify the name of the task.
● Volume (µL)
(2)
: specify the volume for the task in µL.
●
Speed
(2)
: specifiy the speed for aspirating and dispensing.
● Comments: enter any comments related to the task.
● Display text
(2)
: enter text that is displayed on the pipette’s LCD screen when the
task is activated.
●
Execute automatically (checkbox)
(4)
: specify whether the task should be executed
automatically after the previous task is completed.
Dispense all task has the following parameters:
●
Task name
(2)
: specify the name of the task.
●
Speed
(2)
: specify the speed for the dispense.
● Comments: enter any comments related to the task.
●
Display text
(2)
: enter text that is displayed on the pipette’s LCD screen when the
task is activated.
●
Execute automatically (checkbox)
(4)
: specify whether the task should be executed
automatically after the previous task is completed.
Repeat task has the following parameters:
● Task name
(2)
: specify the name of the task.
●
Number of iterations
(2)
: specify how many times the pipette should repeat the
tasks that are placed inside the repeat task.
● Comments: enter any comments related to the task.
NOTE
The number of characters for Display text is limited
(3)
.
NOTE
The number of characters for Display text is limited
(3)
.
NOTE
For certain PIPETMAN M models the minimal volumes in Aspirate and
Dispense tasks might be different if these tasks are located inside Repeat loop.