Gilson F70301, Руководство пользователя

Страница: 7 / 16

- 7 -
User's GUide EN
Figure 9 - Position indicators on the TRACKMAN
Microplate and/or Microtube Holder positioning:
The TrACKMAN is ideal for tracking pipetting to 96-well
microplates, as well as to 384-well microplates. To position
your microplate or Microtube Holder, use the position
indicators on the TrACKMAN (see fig. 9) and the indica-
tion displayed on the front panel. select the vessel type in
the software (see Chapter 6). The Led lights will indicate
the chosen pattern and help you place the microplate or
Microtube Holder. Before starting a “run” the Led light pat-
tern will illuminate again for a final positioning verification.
5
GEttinG StArtEd
Power Management
The TrACKMAN is provided with a minimal battery charge.
Before using a new TrACKMAN, it is recommended to
fully charge the battery. The TrACKMAN battery has been
designed to ensure up to 8 hours of cordless operation.
For service continuity when needing more capacity, your
TrACKMAN can also be used while charging.
Battery charging
The TrACKMAN charges 80% of its full battery capacity in
less than an hour. it takes three hours to fully charge the
battery. The battery charges fastest with the unit power off.
Use the power supply and power supply cable, supplied
with the TrACKMAN, to make the connection between
the power receptacle on the TrACKMAN and a power
source. The TrACKMAN starts charging.
Cautions:
Only use a power supply ap-
proved or supplied by Gilson.
Use of an incompatible
power supply can damage
the TRACKMAN!
Use indoors.
USB port Power connection
Figure 10