Gilson F110761, Руководство пользователя

Страница: 8 / 20

Volume Setting
Do not adjust the volume without squeezing both parts of the pipetting handle
.
The volume of liquid to be aspirated is set
using the volume adjustment wheel
.
With the pipetting handle fully squeezed, the
volume is set by slowly turning the volume
adjustment wheel to reach the required
setting.
Never try to force the volume outside of the
volume range permitted by the device.
Tip Fitting
For optimum performance, use of PIPETMAN® DIAMOND Tips or AmpliPur® Expert
Tips with PLATEMASTER is strongly recommended. Plastic tips are for a single use and
should not be cleaned for reuse.
To fit PIPETMAN DIAMOND Tips or AmpliPur Expert Tips on PLATEMASTER:
• Raise the pipetting head vertically using
the pipetting handle. Move the pipetting
head
to the left side.
• Slide the right drawer out and place
a new tip rack on the back position.
The four locations have been specially
designed for PIPETMAN DIAMOND
Tips TIPACK™.
Slots embedded in the
drawers ensure that tip racks securely
fit into all locations.
• Use the pipetting handle to position
the pipetting head to the right and
lower it far enough so that a contact is
made with the tips in the rack.
• Press down on the tip fitting handle with moderate pressure. The tip ejector
must be fully expanded to ensure that the tips are fully attached .
• Move the pipetting head up and the right drawer back.
The device is now ready to pipette liquid.
1
2
1
2
2
1
3
4
5
1
2
3
1
4
5
1 2
Before using AmpliPur® Expert Tips, confirm that you have the
AmpliPur Expert Tips pin-plate assembly (F110765) and AmpliPur
Expert Tips reload block (F110766) installed on PLATEMASTER.
NOTE
O
PE
R
A
TIO
N
8
OPERATION
|
PLATEMASTER®