Gilson ASPEC, Руководство пользователя

Страница: 14 / 38

14
USER’S GUIDE | ASPEC™ POSITIVE PRESSURE MANIFOLD
INTRODUCTION
Locator Plate
The front position of the locator plate
is used as the active position, whereas
the rear position accommodates the
drain well when not in use.
Manifold Locking Lever
Forms the seal between the manifold and SPE cartridge holder when locked.
Push the lever back to unlock (
Red Lock Symbol
, unlocked), and pull the
lever forward to lock ( Green Lock Symbol , locked).
Manifold Positioning Lever
Raises and lowers the manifold over the SPE cartridge holder. The manifold
locking lever must be unlocked to move this lever.
Push the lever back to lower the manifold (toward the
Down position), and
pull the lever forward to raise the manifold (toward the Up position).
Figure 8
Locator Plate on the ASPEC PPM
Rear
Position
Front
Position
Front
(Locked)
Rear
(Unlocked)
Figure 9
Manifold Locking Lever
Front
(Up)
Rear
(Down)
Figure 10
Manifold Positioning Lever