12
Step 3: Rotation and opening the lower shaft lock, pull out the lower shaft
from the hole which joint the seat body and backrest together ,now the seat
body and backrest are separated .
Step4: Pull the seat body forward and so there is gap between the top of the
seat body and backrest. Feed the lap belt through both base guide hooks and
open the side belt guide clip which near the seat belt buckle and guide the
diagonal belt through the side belt guide clip ,then fasten them into the seat
belt buckle of the vehicle, hear"click".
Step 5: Push the seat body back and make the top of the seat body close
together with backrest and there is no gap . Insert the lower shaft into the
hole ,rotate and close the upper shaft lock, the shaft is locked tightly and the
seat body and backrest is jointed together .
EN