GILES OVH-10-FB, Руководство по эксплуатации и обслуживанию

Страница: 14 / 54

4
Model: OVH-10-FB & 11-FB Installation
2. Installation
This section summarizes the procedures necessary to install the OVH-10-FB or OVH-11-FB Hood. Before installing
and attempting to operate, please read the contents of this manual thoroughly. Following these procedures will help
ensure safe and proper installation.
The unit is shipped on a wooden skid with protective framing, secured to the skid by high-tensile plastic strapping
and wrapped with machine applied stretch-wrap. Perform the following steps to unpack the unit:
1. Position the palletized unit in an area with sufficient space for unpacking.
2. Cut and remove stretch-wrap and all strapping.
3. Use appropriate tools to remove the wooden crate from around the unit.
3. Remove any packed accessories and/or parts from the skid and set aside.
4. The unit is extremely heavy. Using suitable lifting equipment, or adequate manpower, lift the unit and remove it
from the shipping skid. See Section 1-4.3, Hood Weights .
5. Properly dispose of all shipping materials.
2-01. Unpacking
• The unit is very heavy! Exercise due caution when handling to avoid personal injury, or damage to the
equipment.
• Exercise care when removing the wooden framing from around the unit to avoid any exposed nails or staples.
• DO NOT ALTER, ADD ATTACHMENTS OF ANY KIND, OR OTHERWISE MODIFY THIS EQUIPMENT.
• Failure to comply with these
CAUTION
notices may result in minor to moderate injury, damage to equipment or
property, and void the warranty.
!
CAUTION
!! IMPORTANT NOTE:
If the palletized unit showed any signs of damage, you should have immediately inspected the equipment and any
other packed accessories, and promptly notified the freight company of any and all damages.
Typically, it is the
customer’s responsibility to negotiate freight damage claims.