GILES FSH-5 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 70

background image

43

Model: FSH-5 & FSH-6

Hood Cleaning & Maintenance

5.03.1

Semi-Annual (6-Mo) Fire Suppression System Inspection & Maintenance

•     Confirm that the fire hazard potential has not changed.
•     Inspect suppressant storage tank for chemical level and charge pressure.
•     Inspect and test the Automan release mechanism.
•     Check all nozzles to ensure they are free of grease build-up.  Confirm that all nozzle blow-off caps are in place

and in good condition; replace as needed. See

Section 2.06.4, Fire Extinguisher Nozzle Locations

.

•     Inspect and test the remote manual activation station for function and wear.
•     Install test detector link; cut to test automatic actuation.
•     Inspect and clean detector links.  Confirm that detector links are of the correct temperature rating.  See

Section 2.06.2, Fire Suppression Detector Links & Location

.

• Inspect link conduit and wire cable for wear at pulleys and detectors; replace if necessary.
• Record maintenance date and service performed in a permanent file, and sign-off on tag attached to system in

a conspicuous location.

Service and inspection of the fire suppression system must be performed by a qualified Ansul® Distributor/Dealer. As a

minimum, field inspection of the fire suppression system must be conducted semi-annually (every 6 months) and shall

consist of the following:

The Annual Inspection & Maintenance is the same as Semi-Annual except:
• All detector links must be replaced with new. See

S

ection 2.05.1, Fire Suppression Detector Link Specification

& Location.

5.03.2

Annual (12-Mo) Fire Suppression System Inspection & Maintenance

Same as Annual Inspection & Maintenance except:
• Replace wet-chemical fire suppressant.
• Hydrostatic test and certify Suppressant Tank and Compressed Gas Charging Cartridge. As alternative

components can be replaced with new.

• Flow test the regulator.

5.03.3

12-Year Fire Suppression System Inspection & Maintenance

«
...
51
52
53
54
55
...
»

Содержание FSH-5







































































Отзывы:

Нет отзывов

Похожие инструкции для FSH-5

Бренд: MacroAir Technologies Страницы: 15

Бренд: Rowenta Страницы: 16

Бренд: Savoy Страницы: 27

Бренд: eta Страницы: 32

Бренд: Valeo Страницы: 107

Бренд: ebm-papst Страницы: 11

Бренд: Nibe Страницы: 24

Бренд: Faro Barcelona Страницы: 16

Бренд: Maico Страницы: 48

Бренд: Savoy Страницы: 25

WITHROP 656 413

Бренд: HAMPTON BAY Страницы: 15

Бренд: Harbor Breeze Страницы: 34

Бренд: Fanimation Страницы: 40

Бренд: kincrome Страницы: 2

Бренд: Fanimation Страницы: 38

Бренд: ebm-papst Страницы: 5

Бренд: Rasonic Страницы: 22

Centra Lo-Carbon SELV HT

Бренд: Vent-Axia Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды