Gilera DNA, Руководство пользователя

Страница: 10 / 68

Clock
The time is displayed even when the engine is off (as the clock is powered directly by
the vehicle's battery); it is displayed in a 12-hour mode with "
AM " or " PM " subscripts.
To adjust the time, proceed as follows: press the " MODE " button until the time is dis-
played, hold down the " CLOCK " button for more than 3 seconds; the hour digit will
now start blinking, and may be set by pressing the " SET " button. To set the minute
digits, press the " CLOCK " button for less than 1 second and adjust through the
" SET " button. Pressing the " CLOCK " button at this stage will update the time and
switch the display back to clock mode.
CAUTION
WE STRONGLY RECOMMEND YOU REFRAIN FROM USING THE LCD FUNC-
TIONS WHILE RIDING
Digital lcd display
The " MODE " button allows you to switch between the trip odometer and the clock. It
operates as follows: if held down for less than 1 second, the trip odometer is displayed;
when pressed again for less than 1 second, the digital clock is visualised, and pressing
the button again for less than 1 second will bring back the total odometer reading. To
zero the trip odometer, hold down the "
SET " button for more than 3 seconds when the
trip function is displayed.
Setting the total and trip odometers
Pushing the " MODE " button for less than a second obtains, respectively, the functions
of:
1. TOTAL - The word " TOTAL " appears and Km/h or mph . The value corre-
sponds to the total distance travelled by the vehicle and it is not adjustable.
10
1 Vehicle