Note:
DC Power Supply to have a 3v AC maximum ripple.
Wiring shown
only required when local indication at damper is needed when
released remotely.
Do not loop wire under Smoke Detector terminals - break wire run to provide system supervision.
An integral LED is included in the damper control panel to indicate blade position of damper. A key is also provided
for local testing
Alternative wiring/control options are available, refer to Head Office if variations required.
Wiring Data
Modes 5/6
The wiring data below provides all the information necessary to effect correct connection of all Ductgard units in their various
modes and control options as well as instructions for including extra feature options. Removal of the lid on the damper
control box provides access to an internal terminal block for the following wiring connections. If in doubt ask.
Modes 5&6 Control Option A
Modes 5&6 Control Option B
Standard Wiring Arrangement with Remote Indicator Option
O
G
R
L
G
R
+
+
-
-
N
240VAC
9VA Supply
24VDC +
300MA Supply -
O
G
R
G
R
+
+
-
-
switch or volt
free contacts
O
G
R
L
G
R
+
+
-
-
N
240VAC
9VA Supply
SO
remote
control
panel
O
G
R
G
R
+
+
-
-
24VDC +
300MA Supply -
SO
KEY - ALL OPTIONS
Link Wiring by Gilberts
External Wiring by Others
O
G
R
R
+ + -
-
G
1
4
2
1
4
2
24V DC
300MA Supply
switch or volt
free contacts
4 wire
smoke
detector
4 wire
smoke
detector
NC NO C
O
G
R
R
L N
+ + -
-
G
240V AC
9VA Supply
NC NO C
Standard Wiring Arrangement with Smokeduct Detector and Remote Indicator
Standard Wiring Arrangement with Remote Control Panel (RCP)
9
DUCTGARD
Duct Mounting Smoke and Fire Control Dampers
